08 · 3D CAD & assemblies

AEF filter cartridge

A replaceable pleated filter cartridge that fits an existing aluminum frame: PU gasket, four-layer pleat pack and an RFID pocket. It was designed to a sample SOW (Rev B), as a sample for a job post.

Interactive 3D

Drag to rotate · pull parts out · put them back

Specifications

Frame outer 628.65 x 628.65 mm; cartridge body 597.65 mm, depth 43 mm
9 components, 27 mates
Pleat: about 12.5 waves, layer 5.35 mm; net channel opening 16.66 mm; wall angle 87.8 deg
Pleat window 573.05 x 563.05 mm
Four layers: front mesh, PET spacer, filter media, back mesh
Gasket interferences are intentional: rib 0.5 mm, insertion hold 2.0 mm, back bead 1.0 mm
Delivery: 5 A3 drawings, 8 images, 6 s 360 deg video (1080 x 1080), design notes
Assumptions: no protective grille; service side is the front; 628.65 mm is the framed outer size

Images · 16

01 · 3D model
02 · Filter cartridge in the aluminum frame
03 · Three-quarter scene (video poster)
04 · Fig. 1 Assembly, front
05 · Fig. 2 Assembly, back
06 · Fig. 3 Cartridge removed
07 · Fig. 4 Exploded cartridge
08 · Fig. 5 Pleat section
09 · Fig. 6 Gasket seat, frame top edge
10 · Fig. 7 Pull tab
11 · Fig. 8 RFID pocket, bottom right
12 · AEF-DR-01 general assembly, A3
13 · AEF-DR-02 cartridge views, A3
14 · AEF-DR-03 pleat profile, A3
15 · AEF-DR-04 gasket sections, A3
16 · AEF-DR-05 tab, RFID, frame, A3